Vai al contenuto
ATS Mini Controller
Offline
Radio + appMemory & schedules2 min di lettura

The EiBi shortwave schedule browser

Find out what is broadcasting on shortwave right now: browse the built-in EiBi schedule, filter by on-air time, distance and language, and tune or save in one click.

Shortwave is full of stations, but knowing what you are hearing, or what you could hear right now, is half the hobby. The app builds in the EiBi schedule, a free list of shortwave broadcasts, so you can browse it without leaving the page.

It’s built in, and works offline

Open the EiBi tab and the schedule loads into the app. The data is saved locally in your browser, so after the first load it is available offline and opens instantly. A Refresh button updates it when a new season is published. (EiBi schedules change a few times a year.)

What’s on air now

By default the list is filtered to Currently on-air, only the stations broadcasting at this moment, based on each entry’s transmission times (in UTC) and the days it runs. It keeps itself current as time passes, so the list always reflects what you can actually tune to. Turn the filter off to see the full schedule, including stations that are off air now.

Sort by distance

Sort by location to rank stations by how far the transmitter is from you. The nearest are often the strongest. Choosing this asks your browser for your location (you can decline). Sorting uses it only to compute distances in your browser. The same saved location also feeds the weather widget, PSK Reporter spots and logbook sharing, as the privacy policy explains.

Search and group

Search by station name, language, target area or country. Group duplicates collapses the many entries on a single frequency into one card showing everyone who shares that channel, handy for working out which of several stations you are actually hearing.

From listing to listening

Each entry has two actions. Tune drives the radio straight to that station, in the right mode. Save drops it into your first free memory slot. From there you can upload it to the radio; see Memory channels.

Accessori consigliati

  • XHDATA AN-80 reel antennaAntennaEiBi lists what is on air; a wire out of the window decides how much of it you actually hear.
  • MLA-30+ active loop antennaAntennaLow-power broadcasters in the schedule need the quieter reception an active loop gives in a noisy flat.

Provalo sulla tua radio

Collegati via USB o Bluetooth e segui passo passo nel controller.

Apri il controller

Altro

Dispositivo

Esplora

Impostazioni

Tema

Benvenuto in ATS Mini Controller

Questa web app si connette alla tua radio ATS Mini via USB o Bluetooth LE e ti permette di controllarla direttamente da un computer o da un telefono. Aggiunge sintonia remota, gestione degli slot di memoria, cattura di screenshot, streaming audio, scansione dello spettro, modifica dei temi e altre funzioni in aggiunta al firmware integrato del dispositivo.

Firmware 2.34+: scegli un metodo di connessione

A partire dal firmware 2.34 la radio accetta il controllo remoto via USB o Bluetooth LE. Scegli in base a cosa conta di più per te: screenshot veloci (USB) o audio pulito dall’uscita da 3,5 mm della radio (Bluetooth) — i due trasporti hanno pregi opposti.

  • USB Serial

    Settings USB Port cambia Off in Ad hoc

    Funziona in qualsiasi browser basato su Chromium. Richiede un cavo USB-C con linee dati (si apre in una nuova scheda).

    Ideale per screenshot e lavoro sui temi. I trasferimenti si completano in uno o due secondi. La cattura audio è rumorosa mentre il cavo è collegato — alla radio manca il filtraggio necessario per isolare l’uscita da 3,5 mm dalla linea di alimentazione USB, quindi ronzio e rumore di commutazione finiscono nel percorso audio.

  • Bluetooth LE

    Settings Bluetooth imposta la modalità su Ad hoc

    Chrome / Edge / Opera su desktop o Android. Il BLE è sperimentale nel firmware 2.34.

    Ideale per un audio pulito. Il Bluetooth LE trasporta solo il controllo remoto, mai l’audio: il suono passa comunque via cavo dall’uscita da 3,5 mm della radio al computer. Senza cavo USB collegato la radio funziona a batteria, quindi quell’uscita resta libera dal rumore della linea di alimentazione USB che filtra nella connessione via cavo. Gli screenshot sono molto più lenti (~30 s) a causa del limite di throughput BLE del firmware.

Più di un firmware

Oltre al firmware ufficiale, l’app include profili per il fork Monster e per il firmware di H. J. Berndt. Capisce da sola quale sia installato dalle risposte della radio, quindi non c’è nulla da scegliere. Quando non corrisponde a nessuno, lo dice invece di tirare a indovinare.

  • Il firmware Berndt non viene mai dato per scontato. Riusa alcuni tasti del firmware ufficiale e non è stabilito cosa facciano lì, quindi l’app chiede prima di passare a quel profilo.
  • I controlli mancanti sono voluti. Ciò che un firmware non sa fare non compare nella pagina, invece di restare disattivato, e sul firmware Berndt i comandi partono uno alla volta, a qualche secondo di distanza.
Come l’app gestisce gli altri firmware (si apre in una nuova scheda)

Scorciatoie da tastiera

I singoli tasti controllano la radio nella pagina Controller, tranne mentre scrivi in un campo.

←→
Sintonizza di un passo
↑↓
Volume su / giù
Enter
OK
BN
Banda successiva / precedente
MV
Modo successivo / precedente
SA
Passo successivo / precedente
WQ
Larghezza di banda successiva / precedente
GF
AGC su / giù
LK
Retroilluminazione su / giù
IU
Calibrazione su / giù
OP
Sospensione on / off
T
Attiva/disattiva log di stato
C
Screenshot
H
Registra ascolto
D
Vista cockpit
⌘K
Cerca pagine e stazioni