Zum Inhalt springen
ATS Mini Controller
Offline
Radio + appMemory & schedules2 Min. Lesezeit

The EiBi shortwave schedule browser

Find out what is broadcasting on shortwave right now: browse the built-in EiBi schedule, filter by on-air time, distance and language, and tune or save in one click.

Shortwave is full of stations, but knowing what you are hearing, or what you could hear right now, is half the hobby. The app builds in the EiBi schedule, a free list of shortwave broadcasts, so you can browse it without leaving the page.

It’s built in, and works offline

Open the EiBi tab and the schedule loads into the app. The data is saved locally in your browser, so after the first load it is available offline and opens instantly. A Refresh button updates it when a new season is published. (EiBi schedules change a few times a year.)

What’s on air now

By default the list is filtered to Currently on-air, only the stations broadcasting at this moment, based on each entry’s transmission times (in UTC) and the days it runs. It keeps itself current as time passes, so the list always reflects what you can actually tune to. Turn the filter off to see the full schedule, including stations that are off air now.

Sort by distance

Sort by location to rank stations by how far the transmitter is from you. The nearest are often the strongest. Choosing this asks your browser for your location (you can decline). Sorting uses it only to compute distances in your browser. The same saved location also feeds the weather widget, PSK Reporter spots and logbook sharing, as the privacy policy explains.

Search and group

Search by station name, language, target area or country. Group duplicates collapses the many entries on a single frequency into one card showing everyone who shares that channel, handy for working out which of several stations you are actually hearing.

From listing to listening

Each entry has two actions. Tune drives the radio straight to that station, in the right mode. Save drops it into your first free memory slot. From there you can upload it to the radio; see Memory channels.

Empfohlenes Zubehör

  • XHDATA AN-80 reel antennaAntennaEiBi lists what is on air; a wire out of the window decides how much of it you actually hear.
  • MLA-30+ active loop antennaAntennaLow-power broadcasters in the schedule need the quieter reception an active loop gives in a noisy flat.

Am eigenen Radio ausprobieren

Über USB oder Bluetooth verbinden und im Controller mitverfolgen.

Controller öffnen

Mehr

Gerät

Entdecken

Einstellungen

Design

Willkommen bei ATS Mini Controller

Diese Web-App verbindet sich per USB oder Bluetooth LE mit deinem ATS Mini Radio, sodass du es direkt vom Computer oder Smartphone aus steuern kannst. Sie ergänzt die eingebaute Firmware des Geräts um Fernabstimmung, Speicherplatzverwaltung, Screenshot-Aufnahme, Audio-Streaming, Spektrum-Scan, Theme-Bearbeitung und weitere Funktionen.

Firmware 2.34+: Verbindungsart wählen

Ab Firmware 2.34 lässt sich das Radio per USB oder Bluetooth LE fernsteuern. Wähle nach dem, was dir wichtiger ist: schnelle Screenshots (USB) oder sauberer Ton am 3,5-mm-Ausgang des Radios (Bluetooth) – die beiden Übertragungswege haben gegensätzliche Stärken.

  • USB Serial

    Settings USB Port von Off auf Ad hoc ändern

    Funktioniert in jedem Chromium-basierten Browser. Erfordert ein USB-C-Kabel mit Datenleitungen (öffnet in einem neuen Tab).

    Am besten für Screenshots und Theme-Bearbeitung. Übertragungen sind in ein bis zwei Sekunden fertig. Die Audioaufnahme ist bei angeschlossenem Kabel verrauscht – dem Radio fehlt die Filterung, um seinen 3,5-mm-Ausgang von der USB-Versorgungsleitung zu isolieren, sodass Brummen und Schaltstörungen in den Audiopfad gelangen.

  • Bluetooth LE

    Settings Bluetooth Modus auf Ad hoc stellen

    Chrome / Edge / Opera auf dem Desktop oder unter Android. BLE ist in Firmware 2.34 experimentell.

    Am besten für sauberen Ton. Bluetooth LE überträgt nur die Fernsteuerung, nie Ton: Der läuft weiterhin per Kabel vom 3,5-mm-Ausgang des Radios zum Computer. Ohne USB-Kabel läuft das Radio auf Akku, sodass dieser Ausgang frei von den USB-Versorgungsstörungen bleibt, die bei einer Kabelverbindung durchschlagen. Screenshots sind wegen der begrenzten BLE-Übertragungsrate der Firmware deutlich langsamer (~30 s).

Mehr als eine Firmware

Neben der offiziellen Firmware enthält die App Profile für den Monster-Fork und für die Firmware von H. J. Berndt. Welche davon läuft, erkennt sie an den Antworten des Radios, du musst also nichts auswählen. Passt keine, sagt sie das offen, statt zu raten.

  • Berndt-Firmware wird nie unterstellt. Sie nutzt einige Tasten der offiziellen Firmware mit, und was diese dort bewirken, ist nicht geklärt – deshalb fragt die App, bevor sie darauf umschaltet.
  • Fehlende Bedienelemente sind Absicht. Was eine Firmware nicht kann, steht gar nicht auf der Seite, statt ausgegraut zu sein, und auf Berndt-Firmware gehen Befehle einzeln hinaus, mit einigen Sekunden Abstand.
Wie die App mit anderer Firmware umgeht (öffnet in einem neuen Tab)

Tastenkürzel

Einzelne Tasten steuern das Radio auf der Controller-Seite, außer während du in ein Feld tippst.

←→
Einen Schritt abstimmen
↑↓
Lautstärke auf / ab
Enter
OK
BN
Nächstes / vorheriges Band
MV
Nächste / vorherige Betriebsart
SA
Nächster / vorheriger Schritt
WQ
Nächste / vorherige Bandbreite
GF
AGC auf / ab
LK
Hintergrundlicht heller / dunkler
IU
Kalibrierung auf / ab
OP
Ruhemodus ein / aus
T
Statusprotokoll umschalten
C
Screenshot
H
Empfang protokollieren
D
Cockpit-Ansicht
⌘K
Seiten & Sender suchen