Skip to content
ATS Mini Controller
Offline

Menu

Gear

Gear for the ATS Mini

Antennas, adapters, accessories and the receiver itself — the things that make the ATS Mini better to own and listen with. Each guide explains what actually helps and what to avoid. New to the radio? Start with the guides.

Some links on this page are AliExpress affiliate links. If you buy through them we may earn a small commission, at no extra cost to you. It never changes the price you pay, and we only list gear we would actually use with an ATS Mini.

  • ATS Mini receiver versionsReceiver · How the ATS Mini hardware revisions differ — V3, V3S, V4 and V4b — which one to buy, and what to check so you get a genuine, flashable unit.
  • AntennasAntenna · Antenna upgrades over the stock whip: a longer telescopic, a counterpoise wire, compact loops, active antennas and a longwire — and which one suits your situation.
  • Antenna adapters & connectorsAdapter / connector · How to fit a bigger or different antenna to the ATS Mini without buying the wrong connector — the SMA-male rule, the RP-SMA trap, and which adapter does what.
  • Accessories & toolsAccessory · The extras that make the ATS Mini nicer to live with — a stand, an antenna mount, the right cable, good earphones, and an antenna-tuning tool.

More

Device

Explore

Settings

Theme
Language

Welcome to ATS Mini Controller

This web app connects to your ATS Mini radio over USB or Bluetooth LE and lets you control it directly from a computer or phone. It adds remote tuning, memory slot management, screenshot capture, audio streaming, spectrum scanning, theme editing and other features on top of the device's built-in firmware.

Firmware 2.34+: pick a connection method

Starting with firmware 2.34 the radio accepts remote control over USB or Bluetooth LE. Pick by what matters more for you: fast screenshots (USB) or clean audio from the radio’s 3.5 mm output (Bluetooth) — the two transports trade off in opposite directions.

  • USB Serial

    Settings USB Port change Off to Ad hoc

    Works in any Chromium-based browser. Requires a data-capable USB-C cable (opens in a new tab).

    Best for screenshots and theme work. Transfers complete in a second or two. Audio capture is noisy while the cable is connected — the radio lacks the filtering needed to isolate its 3.5 mm output from the USB power rail, so hum and switching noise bleed into the audio path.

  • Bluetooth LE

    Settings Bluetooth set mode to Ad hoc

    Chrome / Edge / Opera on desktop or Android. BLE is experimental in firmware 2.34.

    Best for clean audio. Bluetooth LE carries the remote control only, never sound: the audio still travels by cable from the radio’s 3.5 mm output to your computer. With no USB cable attached the radio runs on its battery, so that output stays free of the USB power-rail noise that bleeds through on a wired connection. Screenshots are much slower (~30 s) because of the firmware's BLE throughput cap.

More than one firmware

Besides the official firmware, the app carries profiles for the Monster fork and for H. J. Berndt's firmware. It works out which one your radio runs from the replies it gets, so there is nothing to pick. When nothing matches, it says so instead of guessing.

  • Berndt firmware is never assumed. It reuses some of the official firmware's keys and what they do there is not established, so the app asks you before switching to it.
  • Missing controls are deliberate. Whatever a firmware cannot do is left off the page rather than greyed out, and on Berndt firmware, commands go out one at a time, a few seconds apart.
How the app handles other firmwares (opens in a new tab)
Guides & gear (opens in a new tab)Firmware on GitHub (opens in a new tab)

Keyboard shortcuts

Single keys control the radio on the Controller page, except while you type in a field.

←→
Tune one step
↑↓
Volume up / down
Enter
OK
BN
Next / previous band
MV
Next / previous mode
SA
Next / previous step
WQ
Next / previous bandwidth
GF
AGC up / down
LK
Backlight up / down
IU
Calibration up / down
OP
Sleep on / off
T
Toggle status log
C
Screenshot
H
Log reception
D
Cockpit view
⌘K
Search pages & stations